Monitoring Ip Parameters - HP procurve 8100fl series Management And Configuration Manual

• VLAN interface:
ProCurve(config-vlan-3)# interface vlan 3
ProCurve(config-interface-vlan3)# ip helper-address
10.1.1.2
• Port interface:
ProCurve(config)# int gig 5/2
ProCurve(config-interface-gig 5/2)# ip helper-address
10.1.1.2
2. Globally enable forwarding of IP BOOTP broadcasts on the switch, using
the ip forward-protocol udp bootps command .
ProCurve(config)#ip forward-protocol udp bootps
With ip helper enabled, when the switch receives a broadcasted DHCP
(BOOTP) request, it will convert this to a unicast request, and then forward it
on to the specified DHCP server.

Monitoring IP Parameters

The 8100fl switch provides display of IP statistics and configurations
contained in the routing table. Information displayed provides routing and
performance status.
The show ip interface commands display IP information, such as routing tables,
status, and IP interface configuration, on the switch. The following example
displays all established connections for the switch.
ProCurve#show ip interface brief
Interface IP-Address
Gig1/3 172.18.1.6/30
Gig1/4 172.18.1.10/30
Gig4/5 10.10.20.1/30
Gig4/6 10.10.22.1/30
Lag1000 172.18.1.14/30
Loop0 10.10.40.4/32
Mgmt0 172.17.4.44/24
IP Routing Configuration
Configuring Basic IP Parameters
Status Protocol Vlan
Up Up
Up Up
Up Down
Up Down
Up Up
Up Up
Up Up
4096
4097
4098
4099
4100
0
0
11-11