IP Routing Configuration
Configuring IP Interfaces
11-4
Extending the IP Configuration
You can configure an ProCurve 8100fl interface to support the following
configurations:
ip access-group specifies the name of an access control list to control
■
packets
ip address sets the IP address of an interface
■
ip broadcast-address sets the broadcast address of an interface
■
ip helper-address specifies a destination IP address for UDP broadcast
■
ip ospf configures Open Shortest Path First (OSPF) protocol commands
■
ip policy route-map specifies the policy (route map) to be applied on the
■
interface
ip prefix list builds a prefix list that defines traffic to forward and/or reject
■
from a specified subnet.
ip rip configures ip Routing Information Protocol (RIP) interface
■
commands
You can also enable the following IP functions on interfaces:
ip mask-reply enables the sending Internet Control Message Protocol
■
(ICMP) Mask Reply messages
ip spoofing enables IP spoofing
■
ip unreachables enables IP unreachables which sends ICMP messages
■
back to senders of unknown protocols or undeliverable packets
ip proxy-arp enables proxy ARP
■
ip redirects enables IP re-directs
■