When The Function Status Indicator Lights Up In Red - Ricoh Aficio MP C2030 Operating Instructions Manual

When the Function Status Indicator Lights Up in
Red
If a function key is lit in red, press the key to switch to the screen for the corresponding function, and then
follow the message that appears.
Problem
Documents and reports do
not print out.
An error has occurred.
The machine is unable to
connect to the network.
• If an error occurs in the function you are using, check the message that appears on the control panel,
and then refer to "Messages Displayed" for the relevant function.
Cause
There is no paper left.
The function whose indicator
is lit is defective.
A network error has
occurred.

When the Function Status Indicator Lights Up in Red

Solution
Load paper. See "Loading Paper",
About This Machine
Record the code number shown on the
display and contact your service
representative. See "Messages
Displayed" of each chapter.
You can use other functions normally.
• Check the displayed message and
take an appropriate action. See
"Messages Displayed" of each
chapter.
• Check that the machine is correctly
connected to the network, and that
the machine is correctly set. For
details about how to connect the
network, see "Connecting the
Machine", Network and System
Settings Guide .
• Contact the network administrator.
• If the indicator is still lit even after
trying to solve the problem as
described here, contact your
service representative.
1
.
13