3
Configuring the Switch
Menu
IGMP Snooping
IGMP Configuration
Multicast Router
Port Information
Static Multicast Router Port
Configuration
IP Multicast Registration
Table
IGMP Member Port Table
DNS
General Configuration
Static Host Table
Cache
Basic Configuration
Displaying System Information
You can easily identify the system by displaying the device name, location and
contact information.
Field Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch's network management subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• MAC Address – The physical layer address for this switch.
• Web server – Shows if management access via HTTP is enabled.
• Web server port – Shows the TCP port number used by the web interface.
• Web secure server – Shows if management access via HTTPS is enabled.
• Web secure server port – Shows the TCP port used by the HTTPS interface.
• POST result – Shows results of the power-on self-test
3-8
Table 3-4. Main Menu
Description
Enables multicast filtering; configures parameters for multicast
query
Displays the ports that are attached to a neighboring multicast
router for each VLAN ID
Assigns ports that are attached to a neighboring multicast router
Displays all multicast groups active on this switch, including
multicast IP addresses and VLAN ID
Indicates multicast addresses associated with the selected
VLAN
Enables DNS; configures domain name and domain list; and
specifies IP address of name servers for dynamic lookup
Configures static entries for domain name to address mapping
Displays cache entries discovered by designated name servers
Page
3-160
3-161
3-162
3-163
3-164
3-165
3-166
3-167
3-169
3-171