Expansion Slot Covers - HP ProLiant DL380 G7 Maintenance And Service Manual

Remove the fans
7.
Remove the fan cage.
8.
To replace the component, reverse the removal steps. When re-installing the fans, press down on the top of
each fan to be sure it is seated properly.

Expansion slot covers

CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
Power down the server (on page 26).
1.
Extend the server from the rack (on page 27).
2.
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the expansion slot cover:
5.
("Hot-plug fan" on page 40).
To prevent damage to the server or expansion boards, power down the server and
For proper cooling do not operate the server without the access panel, baffles,
("Access panel" on page 31).
("PCI riser cage" on page 33).
Removal and replacement procedures 48