Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
9.
Install the heatsink.
10.
IMPORTANT:
system board.
Install all components removed from the failed system board.
11.
Install the access panel
12.
Install the power supplies
13.
Power up the server.
14.
After you replace the system board, you must re-enter the server serial number and the product ID.
During the server startup sequence, press the F9 key to access RBSU.
1.
Select the Advanced Options menu.
2.
Select Service Options.
3.
Select Serial Number. The following warnings appear:
4.
Install all components with the same configuration that was used on the failed
("Access
panel" on page 31).
("Hot-plug power
supply" on page 36).
Removal and replacement procedures 80