To replace the component, reverse the removal procedure.
Front left bezel
To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
Extend or remove the Systems Insight Display
6.
Remove the three T-10 Torx screws, and then detach the front bezel.
7.
To replace the component, reverse the removal procedure.
Front right bezel
To remove the component:
Extend or remove the server from the rack
1.
server from the
rack" on page 27).
("Access
panel" on page 31).
("PCI riser
cage" on page 33).
("Air
baffle" on page 32).
rack" on page 27).
("Remove the server from the
("Systems Insight
Display" on page 45).
("Remove the server from the
Removal and replacement procedures 46
rack" on page 28,
"Extend the
rack" on page 28,
"Extend the