Fan Cage - HP ProLiant DL380 G7 Maintenance And Service Manual

Remove the three T-10 Torx screws, and then detach the front bezel.
2.
To replace the component, reverse the removal procedure.

Fan cage

To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
Remove the fan blanks.
6.
rack" on page 27).
("Access panel" on page 31).
("PCI riser cage" on page 33).
("Air baffle" on page 32).
("Remove the server from the
Removal and replacement procedures 47
rack" on page 28, "Extend the