Remove the air baffle
5.
Remove the fan blanks.
6.
Remove the fans
7.
Remove the fan cage.
8.
To replace the component, reverse the removal steps and press down on the top of each fan to be sure it is
seated properly.
Expansion slot covers
CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
Power down the server (on page 26).
1.
Extend the server from the rack (on page 25).
2.
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the expansion slot cover:
5.
("Air
baffle" on page 39).
("Hot-plug
fan" on page 36).
To prevent damage to the server or expansion boards, power down the server and
For proper cooling do not operate the server without the access panel, baffles,
("Access
panel" on page 30).
("PCI riser
cage" on page 38).
Removal and replacement procedures 40