Remove the optical drive.
5.
To replace the component, reverse the removal procedure.
Optical drive cage
To remove the component:
CAUTION:
all bays are populated with either a component or a blank.
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Disconnect the cable from the optical drive.
4.
To prevent improper cooling and thermal damage, do not operate the server unless
rack" on page 27).
("Access
panel" on page 31).
("Remove the server from the
Removal and replacement procedures 38
rack" on page 28,
"Extend the