System Board - HP ProLiant DL380 G7 Maintenance And Service Manual

System board

To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove all power supplies
3.
Remove the access panel
4.
Remove the PCI riser cage
5.
Remove the battery pack
6.
Remove the air baffle
7.
Remove all DIMMs ("DIMMs" on page 70).
8.
Remove the hot-plug fans
9.
Remove the fan cage
10.
Remove the power supply backplane
11.
Disconnect all cables connected to the system board.
12.
Open the heatsink retainer bracket.
13.
rack" on page 27).
("Hot-plug power
("Access panel" on page 31).
("PCI riser cage" on page 33).
("Removing the battery
("Air baffle" on page 32).
("Hot-plug fan" on page 40).
("Fan cage" on page 47).
("Power supply
("Remove the server from the
supply" on page 36).
pack" on page 51).
backplane" on page 39).
Removal and replacement procedures 73
rack" on page 28, "Extend the