Disconnect all cables from the hard drive backplane.
5.
Remove the hard drive backplane.
6.
To replace the component, reverse the removal procedure.
SFF hard drive cage
To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove all hot-plug hard drives
4.
Disconnect all cables from the hard drive backplane.
5.
rack" on page 27).
("Access
panel" on page 31).
("Hot-plug SAS hard
("Remove the server from the
drive" on page 34).
Removal and replacement procedures 42
rack" on page 28,
"Extend the