System Maintenance Switch - HP ProLiant DL380 G7 Maintenance And Service Manual

Remove the battery.
7.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server or data loss could occur.
Default Function
Off Off = iLO 2 security is enabled.
On = iLO 2 security is disabled.
Off Off = System configuration can be modified.
On = System configuration is locked and cannot be modified.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = Normal
On = ROM treats system configuration as invalid.
Off Reserved
Off Reserved
Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
Removal and replacement procedures 72