Xerox WorkCentre 7132 User Manual page 197

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
Feature
Protocol Settings IP Address List:
Allows you to limit the IP address used for receiving print data when
TCP/IP is enabled.
• IP Filter – Allows you to enable or disable IP filtering.
• Number – Displays the entry number of the IP address list from 1
• Permitted IP Address – Enter the IP address for receiving print
• IP Mask – Enter an IP address mask for each IP address entered
LPD
Allows you to configure the time-out settings for the LPD port.
Port Number – Allows you to configure the port number. The default
is "515".
TBCP Filter – This is only displayed when PostScript is enabled.
Connection Time-Out – Allows you to specify the connection time-out
period when transmission fails.
SNMP
Allows you to configure the following options when accessing the
printer via SNMP.
Community Name (Read Only) – Enter the community name used for
display.
Community Name (Read/Write) – Enter the community name for
display and update.
Community Name (Trap Notification) – Enter the trap notification
community name.
System Administrator – Enter the name of the System Administrator.
Trap Notification Settings – Allows you to set the trap destination
addresses from the following options.
• Transport
• Network Number (IPX)
• MAC Address (IPX)
• Socket Number (IPX)
• IP Address (UDP)
• Port Number (UDP)
• Trap Version
• Community String (Trap Notification)
• Notification Event
Setting items
to 10.
data when TCP/IP is enabled.
in permitted IP address.
Properties
197