Xerox WorkCentre 7132 User Manual page 35

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
Integrated Office Finisher
(Optional)
Staple Cartridge
Integrated Office Finisher
Allows you to staple or sort copies automatically. The Integrated Office Finisher Center
Tray can hold 500 sheets of 24 lb bond or 90 g/m
Duplex Module
Allows you to make double-sided copies. The Duplex Module can be used when paper
is supplied from Tray 1, 2, or 3. For more information, refer to 2 Sided Copying in the
Copy chapter on page 53.
Trays 2 & 3
At the base of the machine, the following optional trays will be available, depending on
the configuration.
• Two Tray Module - Can be added to the standard 1-tray configuration. Each tray can
hold 520 sheets of 20 lb bond or 80 g/m
• Tandem Tray Module - Can be added to the standard 1-tray configuration to provide
high volume paper sources. Tray 2 can hold a maximum of 900 sheets of 20 lb bond
2
or 80 g/m paper in Letter or A4 size, long edge feed. Tray 3 can hold 1,200 sheets
of 20 lb bond or 80 g/m
referred to as "TTM" in this manual.
Tray 5 (Bypass)
Allows you to bypass the standard paper trays to print on different sized paper. The
Bypass Tray can hold 100 sheets of 20 lb bond or 80 g/m
B6 (SEF) or Envelope Monarch (LEF) to A3 (SEF) or 11 × 17 inch (SEF).
NOTE: Do not place paper with a length less than 140mm in the Bypass Tray, as this
may cause paper jams and potentially damage the inside of the machine.
2
paper.
2
paper in Letter or A4 size. The Tandem Tray Module is
Machine Components
Integrated Office Finisher
Center Tray
2
paper in Letter/A4 size or smaller.
2
paper in sizes ranging from
35