Fax Mode Settings; Screen Defaults - Xerox WorkCentre 7132 User Manual

TIFF Format
Image Transfer Screen

Fax Mode Settings

Screen Defaults

Fax Screen Default
Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
Specifies the type of the TIFF format to be used when TIFF is selected for saving
scanned data.
Specifies whether to display a confirmation message when scanning is finished. Select
from [Disabled], [Display Message Only], and [Display Message and Screen].
This section describes the features that allow you to change the default settings for the
fax mode. For more information, refer to the following.
Screen Defaults – page 271
Fax Defaults – page 272
Fax Control – page 273
File Destination/Output Destination – page 276
Reduce/Enlarge Presets – page 277
Original Size Defaults – page 277
Local Terminal Information – page 278
iFax Control – page 279
1.
Select [Fax Mode Settings] on
the [System Settings] screen.
2.
Select the required option.
3.
Select [Close].
This feature allows you to define the initial settings for the fax feature screens.
1.
Select [Screen Defaults] on the
[Fax Mode Settings] screen.
2.
Change the required settings.
3.
Select [Close].
Specifies the fax default screen to display when you select the fax/Internet Fax feature.
Select from [Fax Recipients Programming Screen], [General Settings], and [Address
Book].
Fax Mode Settings
271