Waste Toner Container And Ros Cleaner - Xerox WorkCentre 7132 User Manual
Hide thumbs
Also See for WorkCentre 7132:
- Service documentation (1726 pages) ,
- User manual (468 pages) ,
- System administration manual (184 pages)
Table of Contents
Advertisement
Waste Toner Container and ROS Cleaner
Removing the Old Waste Toner Container
Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
7.
Close the front cover.
NOTE: Press firmly in the top center
when closing the cover. If an error
message appears on the display,
press the cover on the right-hand
side to close the cover completely.
The waste toner container lasts approximately 31,000 copies and prints. The machine
will display a warning message approximately 1,500 pages before the waste toner
container becomes full. The machine will shutdown when the waste toner container is
full, and a message will be displayed on the screen to indicate that the container needs
to be replaced. The ROS cleaner should be replaced at the same time.
1.
Select [Waste Toner Container]
on the [Supplies] screen or the
[Consumables Status] screen.
2.
Pull the front cover open.
3.
Remove the waste toner
container (R3) from the
machine.
NOTE: Be careful when handling the
waste toner container to avoid
spilling toner.
SMart Kit (Customer Replaceable Units)
363
Advertisement
Table of Contents
