Omron I537-E2-01 User Manual page 53

„
Straight Solderless Terminals for Signal Lines
Models and sizes of straight solderless terminal are shown in the following table.
2
Wire Size mm (AWG)
0.25 (24)
0.5 (20)
0.75 (18)
1.25 (16)
2 (14)
„
Wiring Method
Use the following procedure to connect wires to the terminal block.
1. Loosen the terminal screws with a thin-slot screwdriver.
2. Insert the wires from underneath the terminal block.
3. Tighten the terminal screws firmly.
Strip the end for
7 mm if no sold-
erless terminal
is used.
Wires
Table 2.8 Straight Solderless Terminal Sizes
Model d1
AI 0.25 - 8YE 0.8
AI 0.5 - 8WH 1.1
AI 0.75 - 8GY 1.3
AI 1.5 - 8BK 1.8
AI 2.5 - 8BU 2.3
Fig 2.16 Straight Solderless Terminal Sizes
Thin-slot screwdriver
Control circuit
terminal block
Solderless terminal or wire
without soldering
Fig 2.17 Connecting Wires to Terminal Block
Wiring Control Circuit Terminals
d2 L Manufacturer
2 12.5
2.5 14
2.8 14 Phoenix Contact
3.4 14
4.2 14
Blade of screwdriver
3.5 mm max.
Blade thickness: 0.6 mm max.
23
2-