Table of Contents
Advertisement
20.5.99
Step 5 (PBX operation only): Program the trunk code
Step 6: Try out the telephone
kap03.fm5
If you are operating your Profiset 70isdn at a telecommu-
nications system (private branch exchange), you must
program a trunk code in accordance with the configura-
tion of the system.
Press the
>
Service?
Press the
?
Press the
>
2=configuration?
Press the
?
Press the
>
15=external call?
Enter the trunk code using the keypad, e.g. 0 (depending
on your telecommunications system). Then press
h
Press
when finished.
You can now try out your Profiset 70isdn!
To call a subscriber:
Lift the handset.
c
o
Enter the directory number.
The number is dialed.
To call yourself:
Lift the handset.
c
o
Enter the directory number.
The number is dialed.
The entry appears in your call list.
The date and time are preset with zeros by de-
fault (upper display line). The correct date and
time are set automatically by the switching cen-
tre the first time an outgoing call is set up. If
your network provider does not support this
service, you can program the date and time
yourself (
Profiset 70isdn, GB: A30853-X300-B501-3-7619
Putting the system into service
key until the lower display line shows:
>
key.
key until the lower display line shows:
>
key.
key until the lower display line shows:
>
page 20).
.
?
11
Advertisement
Table of Contents
