Configure Private Vlans - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

Configure Private VLANs

A private VLAN contains switch ports that cannot communicate with each other, but can
access another network. These ports are called private ports. Each private VLAN contains
one or more private ports and a single uplink port or uplink aggregation group. Note that all
traffic between private ports is blocked at all layers, not just Layer 2 traffic, but also traffic
such as FTP, HTTP, and Telnet.
From the Security > Management Security > Traffic Control > Private Vlan menu, you
can access the pages that are described in the following sections:
• Configure the Private VLAN Type
• Configure Private VLAN Association Settings
• Configure the Private VLAN Port Mode
• Configure a Private VLAN Host Interface
• Configure a Private VLAN Promiscuous Interface
Configure the Private VLAN Type

To configure a private VLAN type:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Private Vlan > Private Vlan Type Configuration.
6. Select the check box for the VLAN ID that you want to configure.
on page 266
on page 267
on page 268
on page 269
on page 271
Change the Default IP Address of the
Manage Device Security
266