Hardware Specifications And Switch Characteristics - NETGEAR ProSafe XS728T User Manual

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728T and XS748T

Hardware Specifications and Switch Characteristics

Table 72. Hardware specifications and switch characteristics
Feature
XS728T interfaces
XS748T interfaces
Flash memory size
SDRAM size and type
Switching capacity
Forwarding method
Packet forwarding rate
MAC addresses
Green Ethernet
Supported protocols and standards
Description
28 1000/10000 Mbps switching ports:
• Ports xg1–xg24 are copper ports (RJ45).
• Ports xg25–xg28 are fiber ports (SFP+).
48 1000/10000 Mbps switching ports:
• Ports xg1–xg44 are copper ports (RJ45).
• Ports xg45–xg48 are fiber ports (SFP+).
256 MB NAND
512 MB DDR3
Non blocking full wire speed on all packet sizes
Store and forward
1G: 1,488,000 pps
10G: 14,880,000 pps
16 K
Automatic power-down on port when link is down, short cable mode and
EEE mode
• TCP/IP
• UDP
• HTTP
• ICMP
• TFTP
• DHCP
• IEEE 802.1D
• IEEE 802.1 p
• IEEE 802.1Q
• IEEE802.3 1000BASE-T and 10GBASE-T
• IEEE802.3az (EEE)
Hardware Specifications and Default Settings
370