Perform A Cable Test - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The following table describes the EAP statistics displayed on the page.
Table 67. EAP Statistics information
Field
Port
EAPOL Frames Received
EAPOL Frames Transmitted
EAPOL Start Frames
Received
EAPOL Logoff Frames
Received
EAPOL Last Frame Version
EAPOL Invalid Frames
Received
EAPOL Length Error Frames
Received
EAP Response/ID Frames
Received
EAP Response Frames
Received
EAP Request/ID Frames
Transmitted
EAP Request Frames
Transmitted

Perform a Cable Test

Use the Cable Test page to display information about the cables connected to switch ports.

To perform a cable test:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
Description
Selects the port to be displayed. When the selection is changed, a page
update occurs causing all fields to be updated for the newly selected port. All
physical interfaces are valid.
This displays the number of valid EAPoL frames of any type that were
received by this authenticator.
This displays the number of EAPoL frames of any type that were transmitted
by this authenticator.
This displays the number of EAPoL start frames that were received by this
authenticator.
This displays the number of EAPoL logoff frames that were received by this
authenticator.
This displays the protocol version number carried in the most recently
received EAPoL frame.
This displays the number of EAPoL frames that were received by this
authenticator in which the frame type is not recognized.
This displays the number of EAPoL frames that were received by this
authenticator in which the frame type is not recognized.
This displays the number of EAP response/identity frames that were
received by this authenticator.
This displays the number of valid EAP response frames (other than resp/ID
frames) that were received by this authenticator.
This displays the number of EAP request/identity frames that were
transmitted by this authenticator.
This displays the number of EAP request frames (other than request/identity
frames) that were transmitted by this authenticator.
Monitor the System
317