View Vlan Status - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

View VLAN Status

You can view the status of all currently configured VLANs.

To view the VLAN status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > VLAN > Advanced > VLAN Status.
The following table describes the nonconfigurable information displayed on the page.
Table 21. VLAN status
Field
VLAN ID
VLAN Name
VLAN Type
Routing Interface
Member Ports
Definition
The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is 1
to 4093.
The name of the VLAN. VLAN ID 1 is always named Default.
The VLAN type:
• Default (VLAN ID = 1). Always present.
• Static. A VLAN that you configured.
• Dynamic. A VLAN created by GVRP registration that you did not
convert to static, and that GVRP can therefore remove.
The interface associated with the VLAN, in the case that VLAN routing
is configured for this VLAN.
The ports and LAGs that are included in the VLAN.
Configure Switching
99
Change the Default IP Address of the