Setting "Timer Setup - Denon S-101 Operating Instructions Manual

ENGLISH
System Setup
3 When "SLIDE SHOW" is selected:
CURSOR •
Press the or
desired setting item, then press the
-5
button.
5 ~ 15SEC (Factory default : 5 SEC):
The interval can be set from 5 to 15 seconds in steps of 1
second.
3 When "AUTO POWER MODE" is selected:
CURSOR •
Press the or
desired setting item, then press the
-6
button.
OFF (Factory default):
The auto power off function is not activated.
ON:
The function for automatically turning the power off when the
function is set to DVD is activated.
3 When "SCREEN SAVER" is selected:
ª
button to select the Press the
ENTER
desired setting item, then press the
-7
button.
OFF (Factory default):
Select this when you do not want the screen saver to operate.
ON:
ª
button to select the
Select this to start up the screen saver. The screen saver
ENTER
starts up if no operation is performed for about 5 minutes.
4
Press the
SETUP MENU", then press the
the setting.
• The next screen in the "SETUP" menu screen appears.
CURSOR •
ª
or button to select the
ENTER
CURSOR ª
button to select "NEXT
ENTER
to enter
53
ENGLISH

Setting "TIMER SETUP"

• With the S-101, the timer only works when the function is set
to "TUNER" or "DVD".
• Be sure to set the current time ( page 33). The timer will not
operate if the current time is not set.
2 Setting the "ONCE TIMER" and "EVERY
TIMER"
1
CURSOR
0 or 1 button to select
Press the
"TIMER SETUP" icon, then press the
button.
• The "TIMER SETUP" menu screen appears.
2
CURSOR •
Press the or ª
"ONCE TIMER" or "EVERY TIMER", then
ENTER
press the button.
• The respective timer setting screens are displayed.
ONCE TIMER:
Use the once timer to switch the power on and off (standby)
at the specified time once only.
EVERY TIMER:
Use the every timer to switch the power on and off (standby)
once at the same time each day.
CLOCK SETUP:
Use to set the current time ( page 33, 34).
System Setup
ENTER
button to select