Connecting A Tv With 21-Pin Scart Terminal Connections; To Change The Speaker Cable; Connecting The Antenna Terminals - Denon S-101 Operating Instructions Manual

Connecting Other Sources

Connecting a TV with 21-pin SCART terminal connections

• Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit
system may cause disturbance in the picture.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" in "HELP" to comply with your TV's video
format. When the TV is PAL formated, set to PAL.
• When the switch is set to the SCART position, the video signal is not output from the
components.
• Output video signals to the TV using the SCART connector.
The DVD function outputs RGB signals. Other functions output video signals.

To change the speaker cable

Refer to the procedure below if you want to switch to a different speaker cable. This example
Monitor TV
describes how to mount the "+" side cable to the connector. Mount the "–" side cable in the same
D G
21-pin SCART terminal IN way.
q Insert the included hexagonal wrench into the hole
w Turn the hexagonal wrench in the direction of
e Pull out the old cable. Be careful not to leave any
r Peel off the cable's sheath and insert the new
t Turn the hexagonal wrench in the direction of
If the polarities are inverted, the phase may be off and the bass sound may be missing, resulting
in an unnatural sound.

Connecting the antenna terminals

• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the F-type antenna adapter
(Option).
NOTE:
• Do not connect two FM antennas
• Even if an external AM antenna is used, do
• Make sure AM loop antenna lead terminals
16
ENGLISH
at the side of the connector's "+" side. (Arrow A)
arrow B to loosen the cable.
broken wire parts inside the connector. (Arrow C)
cable with the copper colored core wire twisted
tightly together into the connector. (Arrow D)
Arrow E and tighten securely so that the cable cannot be pulled out. Be sure to connect both
sides of the cable to the connectors with the proper polarities.
FM antenna
Direction of
broadcasting station
FM
antenna
75 Ω/ohms
adapter
COAXIAL cable
(Option)
simultaneously.
not disconnect the AM loop antenna.
do not touch metal parts of the panel.
ENGLISH
Connecting Other Sources
A
C
E
D B
AM loop antenna
(Supplied)
White
Black
AM outdoor
antenna
Ground