Setting "Timer Setup - Denon S-301 Operating Instructions Manual

ENGLISH
System Setup
4 When "SCREEN SAVER" is selected:
CURSOR •
Press the or
desired setting item, then press the
-7
button.
OFF (Factory default):
Select this when you do not want the screen saver to operate.
ON:
Select this to start up the screen saver. The screen saver
starts up if no operation is performed for about 5 minutes.
5
CURSOR ª
Press the button to select "NEXT
SETUP MENU", then press the
the setting.
• The next screen in the "SETUP" menu screen appears.

Setting "TIMER SETUP"

ª
button to select the
• With the S-301, the timer only works when the function is set
ENTER
to "TUNER" or "DVD".
• Be sure to set the current time (
operate if the current time is not set.
2 Setting the "ONCE TIMER" and "EVERY
TIMER"
1
Press the
"TIMER SETUP" icon, then press the
button.
• The "TIMER SETUP" menu screen appears.
ENTER
to enter
2
Press the
"ONCE TIMER" or "EVERY TIMER", then
press the
• The respective timer setting screens are displayed.
ONCE TIMER:
Use the once timer to switch the power on and off (standby)
at the specified time once only.
EVERY TIMER:
Use the every timer to switch the power on and off (standby)
once at the same time each day.
CLOCK SETUP:
Use to set the current time (
page 35). The timer will not
CURSOR
0 or 1 button to select
ENTER
CURSOR •
or ª button to select
ENTER
button.
page 35, 36).
59
ENGLISH
3
CURSOR •
Press the or ª
"ENABLE".
DISABLE (Factory default):
Set this to disable the "ONCE TIMER" or "EVERY TIMER"
function that has been set.
ENABLE:
Set this to enable the "ONCE TIMER" or "EVERY TIMER"
function that has been set.
4
CURSOR •
Press the ª , 0 or 1 button to
,
select start time, end time, and function, then
ENTER
press the button.
When "TUNER" is selected, the preset frequency can also
be selected.
Example:
Listening to P01 (FM 92.5 MHz) from "PM 12:35" to
"PM 12:56" using the "EVERY TIMER".
5
CURSOR •
ª
Press the or
"EXIT SETUP", then press the
• The timer is turned on and the timer standby indicator
lights. This completes the setting of the timer.
6 ON/STANDBY
Press the switch.
• The standby mode is set.
(The power indicator turns orange.)
When the timer start time is reached, the timer operates.
• To exit the once timer or every timer set mode:
Press the RETURN button, you can go back to the previous
screen.
System Setup
button to select
button to select
ENTER
button.