Setting Up The System - Denon DHT-500SD Operating Instructions Manual

Hide thumbs Also See for DHT-500SD:
Table of Contents

Advertisement

ENGLISH
10

SETTING UP THE SYSTEM

(1) System setup items
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 6 to 9), make the various settings described below on the monitor screen using the ADV-500SD's on-screen
display function.
• Use the following buttons to set up the system:
STATUS
SETUP
ENTER
CH SELECT
RETURN
DISPLAY
ANGLE
AUDIO
RC-973
QUICK SETUP
SPEAKER
CONFIGURATION
DELAY TIME
CHANNEL LEVEL
LANGUAGE
SUBTITLE
TV ASPECT
TV TYPE
WALL PAPER
VIDEO OUT
VIDEO MODE
MID NIGHT MODE
RATING LEVEL
PASSWORD
16
SETUP button
MUTING
Press this to display the system setup menu.
TONE /DIMMER
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
SURROUND
PARAMETER
CURSOR buttons
+
-
VCR CH
and
:
Use these to move the cursors (
MENU
TOP MENU
PBC
to the left and right on the screen.
SUB TITLE
and
Use these to move the cursors (
:
to the up and down on the screen.
Setup items and default values (set upon shipment from the factory)
Setup
Set the size of the room and the listening position.
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
LARGE for full-size, full-range) to automatically set the
composition of the signals output from the speakers and
the frequency response.
This parameter is for optimizing the timing with which
the audio signals are produced from the speakers and
subwoofer according to the listening position.
At the listening position, listen to the test tones output
from the different speakers and set so that the playback
level from the different speakers is equal.
Set the OSD Language
Set the subtitle Language
Set the screen size for the TV being used.
Set the video system for the TV being used.
Set the wallpaper for the setup and operation screens.
Set the connector from which interlaced signal are to be
output (S-VIDEO, COMPONRNT, or SCART).
Select the desired video mode.
Set the dynamic range output when playing discs.
Make the playback restriction setting for DVDs with
restricted viewing.
Change the password.
and
)
and
)
Default settings
ROOM
SEATING
FRONT
CENTER
SURROUND
SPACE
POSITION
SP.
SP.
MEDIUM
SMALL
SMALL
BACK
4.2m x 4.2m
2.7m (9 ft)
2.4m (8 ft)
2.1m (7 ft)
FRONT SP.
CENTER SP.
SURROUND SP.
SMALL
SMALL
SMALL
SW FREQ. = 150 Hz / SW MODE = LFE / SPEAKER OUT = SW
FRONT & SW
CENTER
SURROUND
2.7m (9 ft)
2.4m (8 ft)
2.1m (7 ft)
FRONT L
CENTER
FRONT R
SURROUND R
SURROUND L
0 dB
0 dB
0 dB
0 dB
ENGLISH
OFF
4 : 3 PS
PAL
BLUE
S-VIDEO
AUTO
OFF
NO LIMIT
0000
SUB-
SURR.
SP.
WOOFER
BACK
SMALL
YES
2.7m (9 ft)
SUB WOOFER
SURR. BACK SP.
YES
NONE
SURR. BACK
SURR. BACK L/C
SURR. BACK R
0 dB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents