Connecting A Dbs/Cable Tuner/Vcr; Connecting A Tape Deck, Md Recorder Or Cd Recorder; Connecting A S-Video Connections (Better Picture Quality); Connecting A Component Connections (Better Than S-Video Picture Quality) - Denon S-101 Operating Instructions Manual

ENGLISH
Connecting Other Sources

Connecting a DBS/Cable tuner/VCR

• When making connections, also refer to the operating instructions of the other components.
• If the device to be connected is equipped with a digital audio output (COAXIAL), connect it to the
DIGITAL Input (COAXIAL) on the ADV-S101.
• When there are multiple input signals, the input signals are detected and the input signal to be
output from the video monitor output terminal is selected automatically in the following order: S-
Video, composite video.

Connecting a tape deck, MD recorder or CD recorder

• When making connections, also refer to the operating instructions of the other components.
• Connect the tape deck's audio output and audio input terminals to the ADV-S101's AUX3 using
pin-plug cords.
DBS / Cable Tuner/
VCR
E
S VIDEO
OUT
D
VIDEO
OUT
B
COAXIAL
OUT
A AUDIO OUT
L
L L
R
R R
Tape deck /
MD recorder /
CD recorder
C
OPTICAL
OUT
C
OPTICAL
IN
A
AUDIO OUT
L
L L
R R
R
A
AUDIO IN
L
L L
R R
R
15
ENGLISH

Connecting a S-Video connections (Better picture quality)

Connecting a component connections
(Better than S-Video picture quality)
PROGRESSIVE/INTERLACED
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" in "HELP" to comply with your TV's video
format. When the TV is PAL formatted set to PAL.
• When the PROGRESSIVE/INTERLACED switch on the ADV-S101's rear panel is set to
"PROGRESSIVE", no video signals are output from the VIDEO OUT or S-VIDEO OUT terminals.
Set the PROGRESSIVE/INTERLACED switch on the ADV-S101's rear panel to "INTERLACED", if you
want to use the VIDEO OUT or S-VIDEO OUT signals (
• The video signal input to the AUX1 and AUX2 connectors is not output from the components.
2 To switch from interlace to progressive
• Turn off the power before changing the switch.
• Choose settings according to the TV to be connected.
• Set the PROGRESSIVE/INTERLACED switch on the ADV-S101's rear panel to
select the type of the TV.
PROGRESSIVE:
Select this when using the ADV-S101 connected to a progressive type TV.
INTERLACED:
Select this when using the ADV-S101 connected to an interlace type TV.
• For the component output only, it is possible to switch between interlace image output and
progressive image output. It is not possible to specify progressive image output for the Video
output connectors or S-Video output connector.
• When the switch is at the PROGRESSIVE position, no video signal is output from the SCART
connector.
When the switch is at the INTERLACE position, the video signal is output from the SCART
connector as well.
Connecting Other Sources
Monitor TV
E
S VIDEO
IN
Monitor TV
D F
COMPONENT VIDEO IN
Y
P /C
B B
P /C
R R
page 11, 15).