Setting "Distance - Denon S-101 Operating Instructions Manual

System Setup
2
CURSOR •
Press the or ª
"CHANNEL LEVEL", then press the
button.
• The channel level setting screen appears.
3
CURSOR
Press the 0 or 1 button to select
"AUTO", "MANUAL" or "OFF" for the
"TEST TONE" mode, then press the
button.
AUTO:
Adjust the levels listening to test tones automatically output
from the different speakers.
MANUAL:
Select the speakers from which the test tones are output
when adjusting the levels.
OFF (Factory default):
The test tones are not output.
Detailed settings can be made when this is set to
"MANUAL" first.
4
When "AUTO" mode is selected:
button to select
Press the
ENTER
-1 the speakers to the same volume.
• Test tones are automatically output from the speakers at
intervals of 4 seconds for two of the cycles shown
below, then at intervals of 2 seconds from the third
cycle on.
Front left
The level changes in units of 1 dB each time the
CURSOR
The level can be adjusted in the range –12 dB to +12
dB.
4 When "MANUAL" or "OFF" mode is selected:
Press the
speaker, then press the
-2
to adjust all the speakers to the same volume.
ENTER
5
Press the
• The "SPEAKER SETUP" screen appears.
6
Press the
MENU", then press the
• The "AUDIO SETUP" screen appears.
7
Press the
SETUP MENU", then press the
the setting.
• The next screen in the "SETUP" menu screen appears.
• When the channel levels are adjusted at the channel level
settings, the adjusted values are applied to all playback modes.
CURSOR
0 or 1 button to adjust all
Front right
Subwoofer
or button is pressed.
0 0 1 1
CURSOR •
ª
or button to select the
CURSOR
0 or 1 button
ENTER
button twice.
CURSOR ª
button to select "SETUP
ENTER
button.
CURSOR ª
button to select "NEXT
ENTER
to enter
48
ENGLISH

Setting "DISTANCE"

• Input the distances from the listening position and the various
speakers to set the surround delay time.
• Upon shipment from the factory default the distance is set to
the default values in step 4 below.
Preparation:
Measure the distance from the listening position to the various
speakers.
FL
Subwoofer
listening position
L1: Distance between front right speaker and listening position
L2: Distance between front left speaker and listening position
L3: Distance between subwoofer speaker and listening position
1
CURSOR •
ª
Press the or
"SPEAKER SETUP" at the "AUDIO SETUP",
ENTER
then press the button.
• The "SPEAKER SETUP" screen appears.
ENGLISH
System Setup
FR
button to select