Cross-Connecting Attendant Consoles; Procedure - Nortel M3110 Installation Manual

Procedure 12

Cross-connecting attendant consoles

1 Locate the attendant console terminations at the cross-connect terminal.
2 Connect Z-type cross-connecting wire to the leads of the attendant
console.
3 Locate the line circuit card (TN) terminations.
4 Run and connect the other end of the cross-connecting wire to the
assigned TN terminal block.
Refer to Table 6 for details on Z-type cross-connecting wire and Table 7 on
page 70 for a list of inside wiring colors.
Table 6
Z-type cross-connecting wire
Size
1 pr
3 pr
Telephones and Consoles
Attendant consoles
End of Procedure
Gauge Color
24 Y-BL
BL-Y
24 W-BL
BL-W
W-O
O-W
W-G
G-W
Description, Installation, and Operation
Page 69 of 504
Designation
Tip
Ring
Voice T
Voice R
Signal T
Signal R
Power
Power