Brandline Insert; Headset - Nortel M3110 Installation Manual

Page 338 of 504

Brandline Insert

Headset

553-3001-367 Standard 3.00
Appendix A: Meridian Modular Telephones
The filler plate on the telephone or Display Module contains a removable
insert designed to accommodate custom labeling. You can order blank
Brandline Inserts and have a printer silk screen your company logo on them.
Brandline Inserts snap easily into and out of the filler plate.
The M2216ACD-1 is compatible with most headsets. Amplified headsets are
strongly recommended. The headset/handset interface of the M2216ACD-1
can be adjusted for optimum performance using the Program key. Three
settings are available:
• Plantronics Polaris
• GN Netcom Profile
• NT Liberation
Try using the headset with each of the three settings to determine which
works best. Trial with both internal and external calls is also recommended to
determine optimum performance.
When the amplified headset is used, two choices for volume control are
available:
• the rocker control on the telephone
• the switch on the headset
The settings which provide the clearest communication with the least amount
of distortion are the amplifier setting higher than the telephone volume
control.
The supervisor and agent jacks are not interchangeable. A headset must be
plugged into the agent jack if the telephone is to receive ACD calls.
The M2216ACD-2 agent jack is compatible with any standard carbon
headset. The headset interface of the M2216ACD-2 is not adjustable.
August 2005