Nortel M3110 Installation Manual page 223

LD 97 – Configure parameters for System-wide Flash Download (Part 3 of 3)
Prompt Response
FDDN c d1 d2
FRCE (NO) YES
FVER 0-99
M3900 installation and configuration
Description
Flash Download Prime Directory Number range
Prompt appears only if FDNR = YES
c = Customer number (0-99)
d1 = starting Prime DN
d2 = ending Prime DN
System-wide Flash Download control option
NO = Conditional (default). System-wide Flash Download (via
FDLS in LD 32) applies only to an M3900 series set whose flash
firmware version is different from the version currently found on
the system disk
YES = Forced. Force System-wide Flash Download to all of the
specified M3900 Series Digital telephones regardless of their
current flash firmware versions.
Note 1: Use this option with caution! Once the download tree is
built (i.e., after executing FDLS in LD 32), this option
automatically reverts to NO.
Note 2: This option is not applicable to reporting.
Flash firmware version specified for full report. If 0, report all
versions (default).
Note: This option is applicable to reporting only (via FSUM ALL
in LD 32).
Telephones and Consoles Description, Installation, and Operation
Page 223 of 504