Nortel M3110 Installation Manual page 209

LD 11 – Configure the M3900 Series Digital Telephone (Part 2 of 5)
Prompt Response
TN
l s c u
c u
... ...
DES d...d
... ...
CUST xx
... ...
M3900 installation and configuration
Description
Terminal number
Format for Large System and CS 1000E system, where l = loop,
s = shelf, c = card, u = unit.
If confirmed as 3903V or 3904V, the loop must be a phantom. If
confirmed as 3903H or 3904H, the loop must NOT be a phantom.
Format for Small System, CS 1000S system, Media Gateway 1000B,
and Media Gateway 1000T, where c = card and u = unit.
Input only the card and unit address. If confirmed as 3903V or 3904V,
the card must be a phantom (card slots 61-80).
If the telephone has an Analog Terminal Adapter (ATA), then use the
voice Terminal Numbers 16-31.
...
Designator
d...d = represents an Office Data Administration System (ODAS)
Station Designator of 1-6 alphanumeric characters
...
Customer number as defined in LD 15
...
Telephones and Consoles Description, Installation, and Operation
Page 209 of 504