Nortel M3110 Installation Manual page 37

Figure 3
Removing the fastening screws
Remove These
12 Screws
Do Not Remove
These Screws
5 Raise and hold the top cover to remove the single cable connector only.
The alerter cable does not need to be removed. See Figure 4 on
6 Remove the top cover, and place it upside down to the left of the attendant
console.
Telephones and Consoles
Attendant consoles
Do Not Remove
These Screws
Polystyrene
Foam Sheet
Description, Installation, and Operation
Page 37 of 504
553-AAA0627
page 38.