Display Module; Meridian Programmable Data Adapter - Nortel M3110 Installation Manual

Display Module

A 2-line by 24-character Display Module provides system prompts, feedback
on active features and valuable calling party information. In addition, you can
modify various set features such as volume and screen contrast using the
Program key (top right function key). You can enable a Call Timer which
times calls made or received on the prime DN.
Note: The Display Module is not supported on M2006.
Note: The Display Module requires a Power Supply Board on M2008.
Two types of Display Module are available:
• North American Display — Supports normal business features in two
languages, English and Quebec French.
• Special Applications Display — Supports the following features:
— Automatic Call Distribution (ACD)
— Hospitality
— 6 languages (English, Quebec French, Parisian French, German,
Spanish, Dutch)
A Special Applications Display Module comes as standard equipment on the
M2216ACD telephones. M2008 or M2616 telephones used as ACD
telephones require the Special Applications Display.
Note: It is possible to adjust the Display screen contrast so that it is too
light or too dark to read. If you cannot read the Display, disconnect and
then reconnect the line cord to return to the default settings.

Meridian Programmable Data Adapter

The Meridian Programmable Data Adapter (MPDA) mounts within the
telephone (see Figure 57 on
terminals, personal computers and printers to be connected to the telephone
using an RS-232-D (subminiature) interface. The MPDA has multilingual
capability.
It requires additional power. See "Power requirements" on
Telephones and Consoles
Appendix A: Meridian Modular Telephones
page 340) and allows asynchronous ASCII
Description, Installation, and Operation
Page 335 of 504
page 345.