Nortel M3110 Installation Manual page 359

Table 60
Meridian Modular Telephones self-test steps and results (Part 1 of 2)
Step Action
1 Begin test (plug in line cord while
holding down the RLS key).
The handset is on hook.
2 Press each Function key, from zero
to fifteen (if there are Key Expansion
Modules, continue pressing the
Function keys, in any order).
3 Press the Hold key.
4 Press each dial pad key.
5a Lift the handset (if applicable).
Press the dial pad keys.
Replace the handset.
Appendix B: Meridian Modular Telephones installation
3 Follow the steps in Table 60 to perform the necessary steps and check
results.
Telephones and Consoles
Result
Speaker beeps once, all LCDs flash.
Message Waiting lamps light steadily.
Display reads:LOCAL DIAGNOSTIC MODE
PRESS RLS KEY TO EXIT
Adjacent LCD goes off when a key is
pressed.
Speaker beeps.
Speaker beeps each time a key is pressed.
Speaker beeps.
Handset beeps.
Description, Installation, and Operation
Page 359 of 504