Display Screen Messages - Nortel M3110 Installation Manual

Display screen messages

Table 4
Release lamp indicator status
Type
Night
ON
OFF
OFF
OFF
X
Source information appears on line 2 of the display screen. Destination
information appears on line 3 of the display screen.
The status messages listed below appear on line 4 of the display screen panel.
— MN
— MJ
— C/H
— CW
— BUSY
— NIGHT
— IDLE
— ACTIVE
— S
— EMERGENCY (Power Fail Transfer (PFT) feature is activated.)
The first four status messages appear as MN, MJ, C/H, and CW on line 4 of
the display screen panel. BUSY and NIGHT are combined with the status of
the Release lamp to indicate the console status as shown in Table 4.
Indicator
Busy
X
ON
OFF
OFF
X
Telephones and Consoles
Attendant consoles
(minor alarm)
(major alarm)
(CAS/History File)
(Call Waiting)
(Position Busy)
(Night Service)
(Idle)
(lpk has been selected)
(Shift mode)
Status
Release Display screen status (line 4)
X
X
ON
OFF
X
Description, Installation, and Operation
Page 55 of 504
NIGHT
BUSY
IDLE
ACTIVE
EMERGENCY