Page 192 of 258
Configuring the dialing plan using CS 1000 Element Manager
Figure 61
Zone Dialing Plan and Access Codes
Testing PSTN access using an SRG IP Phone
553-3001-207
Standard 2.00
Dialing Plan configuration
From Element Manager, configure the branch office–specific zone dialing
plan and Access Codes. From the navigator, select IP Telephony > Zones.
From the Zones window in Element Manager, select the Branch Office
Dialing Plan and Access Codes option, and enter the necessary information.
Refer to Figure 61.
Use Procedure 14 to test that PSTN access is working correctly.
Procedure 14
Testing PSTN access using an SRG IP Phone
1
From an SRG IP Phone in Local Mode:
a.
Make a local PSTN call.
b.
Make a long-distance call.
January 2006