Nortel Remote Gateway 50 Configuration Manual page 190

Page 190 of 258
LD 90 – Configure ESN Special Number and Digit Manipulation. (Part 1 of 2)
Prompt Response
REQ NEW
CUST xx
FEAT NET
TRAN AC1
TYPE SPN
SPN x...x
553-3001-207 Standard 2.00
Dialing Plan configuration
INST
CTYP LOC
REQ NEW
CUST 0
FEAT RLB
RLI 18
ENTR 0
LTER NO
ROUT 18
...
DMI 18
...
2 Configure ESN Special Number and Digit Manipulation.
Description
Add new data.
Customer number as defined in LD 15
Network translation tables
Translator – Access Code 1 (NARS/BARS)
Because the call is incoming to the branch office, AC1 is
triggered if INAC = YES in the Route Data Block for the
Virtual Trunk in LD 16 and the INTL call type is associated
with AC1 in NET_DATA of the Customer Data Block in
LD 15.
Special code translation data block
Special Number translation
Enter the SPN digits in groups of 3 or 4 digits, separated by
a space (for example, xxxx xxx xxxx). The SPN can be up to
19 digits long.
The maximum number of groups allowed is 5.
January 2006
Set according to associated SPN pattern