Configuring Bandwidth Management - Nortel Remote Gateway 50 Configuration Manual

Figure 5
Configuring a codec

Configuring Bandwidth Management

The steps to configure Bandwidth Management on the Call Server are as
follows:
1 Define a VPNI number in LD 15.
2 Configure the Bandwidth Management parameters for each zone on the
Call Server using either Element Manager (see "Configuration using CS
1000 Element Manager" on
using LD 117" on
• Call Server zones that will be used for endpoints (telephones and
gateways) with the following properties:
— Intrazone Preferred Strategy = Best Quality (BQ)
— Intrazone Bandwidth = default (1000000)
— Interzone Preferred Strategy = Best Bandwidth (BB)
Main Office Configuration for Survivable Remote Gateway 50
Bandwidth Management
page 60) or LD 117 (see "Configuration
page 61):
Page 59 of 258
Configuration Guide