Nortel Remote Gateway 50 Configuration Manual page 179

LD 86 – Configure the Digit Manipulation Index at the main office. (Part 2 of 2)
Prompt Response
INST x...x
ISPN
(YES)
NO
CTYP
SPN
LOC
LD 86 – Configure Route List Index. (Part 1 of 2)
Prompt Response
REQ NEW
CUST xx
FEAT RLB
RLI
0-127
0-255
0-999
ENTR 0-63
X
LTER NO
Main Office Configuration for Survivable Remote Gateway 50
Description
Insert. Up to 31 leading digits can be inserted, usually none
at the main office. Default is none.
IP Special Number
For off-net calls
For on-net calls
Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical
for correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES,
the CLID is based on the call type before digit manipulation.
For off-net calls (ISPN=YES)
For on-net calls (ISPN=NO)
b. Configure the RLI in LD 86 with the RLB feature.
Description
Add new data.
Customer number as defined in LD 15
Route List data block
Route List Index to be accessed
CDP and BARS
NARS
FNP
Entry number for NARS/BARS Route List
Precede with x to remove
Local Termination entry
Dialing Plan configuration Page 179 of 258
Configuration Guide