Nortel Remote Gateway 50 Configuration Manual page 191

LD 90 – Configure ESN Special Number and Digit Manipulation. (Part 2 of 2)
Prompt Response
- FLEN (0)-24
...
- RLI 0-999
Main Office Configuration for Survivable Remote Gateway 50
Description
Flexible Length
The number of digits the system expects to receive before
accessing a trunk and outpulsing these digits.
Route List Index configured in LD 86 (see step 1 on
page 187)
After configuring the specialized route for calls that have been routed
to the branch office by the NRS, the route must be associated with
the ESN Special Number.
The branch office receives the manipulated number as an incoming
call, indicating that the ZDP value added at the main office is at the
beginning of the number. The branch office ESN configuration must
ensure that the extra digits (the ZDP value) are deleted by using a
proper DMI. The call then terminates at the PSTN connection.
Note: The DMI configured in LD 86 in step 1 on
remove the digits that were inserted in the dialed number at the main
office.
For example, assume ZDP at the main office = 101, Customer
number = 0, and the RLI for the PSTN trunk = 18.
c. >LD 90
REQ NEW
CUST 0
FEAT NET
TRAN AC1
TYPE SPN
SPN 1011
FLEN 0
...
RLI 18
Dialing Plan configuration Page 191 of 258
page 187 is used to
Configuration Guide