Nortel Remote Gateway 50 Configuration Manual page 43

LD 117 – Enable features for an SRG zone.
Command
ENL ZBR <zone> ALL
Configuring zone parameters using
CS 1000 Element Manager
Main Office Configuration for Survivable Remote Gateway 50
4 Enable the features for the branch office zone in LD 11.
Description
Enables features for branch office <zone>.
Use Element Manager to configure the branch office specific zone properties
and time difference.
1 Select IP Telephony > Zones in Element Manager navigator.
The Zones window opens (Figure 2 on page 44). The zone list is the main
window used for zone configuration.
Setting up the main office
End of Procedure
Page 43 of 258
Configuration Guide