Nortel Remote Gateway 50 Configuration Manual page 150

Main office configuration for survivable remote gateway
Hide thumbs Also See for Remote Gateway 50:
Table of Contents

Advertisement

Page 150 of 258
LD 117 - Configure Alternate Prefix number for a particular zone and the All Calls
option, if desired.
Command
CHG ZALT <zone> <ALTPrefix> [<re-route all calls>]
Change ALTPrefix number for zone, where:
<zone>
<ALTPrefix>
[<re-route all calls>]
LD 117 - Print Alternate Prefix number for a particular zone.
Command
PRT ZALT <zone>
Print the ALTPrefix assigned to a particular zone and if the feature operates for all calls from that
zone, where:
<zone>
553-3001-207
Standard 2.00
Alternative Call Routing for Network Bandwidth Management
Description
Input zone number (0-255).
Note: Configure the branch office zone using LD 117 at the main
office.
A digit string, of up to 7 digits, added to the start of the dialed
number, if the call will not be routed through the WAN (due to lack
of bandwidth, poor QoS, or feature is configured for all calls).
Allow or Deny Alternative Call Routing for all calls, where:
— (NO) = deny
— YES = allow
Description
Input zone number (0-255).
If you do not input a zone number, the system prints the
information for all configured zones.
January 2006

Advertisement

Table of Contents
loading

Table of Contents