Page 162 of 258
Maintenance
Command Line Interface maintenance
LD 117 - Enable and disable Alternative Call Routing for NBWM for a zone.
Command
ENL ZALT <zone>
DIS ZALT <zone>
ENL ZBR <zone> [ALL] [LOC][ESA][TIM][ALT] Enable features for the branch office zone. If you
do not input features, then all are enabled.
DIS ZBR [ALL] [LOC][ESA][TIM][ALT] Disable features for the branch office zone. If you do not
input features, then all are disabled.
Note: The system responds with ok, if operation is successful.
LD 117 - Change and Print Zone Alarm Suppression Time Interval.
Command
CHG ZAST <zone> <Alarm Suppression Interval>
PRT ZAST <zone>
553-3001-207
Standard 2.00
Alternative Call Routing for Network Bandwidth Management
Description
Enable Alternative Call Routing for Bandwidth Management for
zone specified.
Disable Alternative Call Routing for Bandwidth Management for
zone specified.
Description
Change Suppression Time Interval for QoS alarms related to
Alternative Call Routing for NBWM feature for zone specified.
Time Interval is measured in seconds from the time the last alarm
was printed.
Default is 0. Range is 0 - 3600 seconds.
Print Suppression Time Interval for QoS alarms related to
Alternative Call Routing for NBWM feature for zone specified.
No entry for zone number results in printout for all zones.
January 2006