Nortel Remote Gateway 50 Configuration Manual page 89

LD 117 — Display Adaptive Network Bandwidth Management information
(Part 2 of 3)
Command Description
PRT INTERZONE [<nearZone>] [<nearVPNI>] [<farZone>] [<farVPNI>]
Print interzone statistics for the specific VPNI zone; where:
• nearZone = ALL or 0-255
• nearVPNI = 1-16383
• farZone = 0-255
• farVPNI = 1-16383
The output of this command displays the following information:
• Near end Zone
• Near end VPNI
• Far end Zone
• Far end VPNI
• State = ENL/DIS
• Type = PRIVATE/SHARED
• Strategy = BB/BQ
• MO/VTRK/BMG = zoneIntent
• QoS factor = %
• Bandwidth configured = Kbps
• Sliding max = Kbps
• Usage = Kbps
• Peak = %
• Call = Cph
• Alarm = Aph
The report rows are grouped as:
Figure 17 on
Main Office Configuration for Survivable Remote Gateway 50
• First row = summary bandwidth usage per near zone
• Next rows = bandwidth usage per near (VPNI- Zone) and far (VPNI -
Zone)
page 92 shows an example of the output for this command.
Bandwidth Management Page 89 of 258
Configuration Guide