Hardware:
1.
Press F6 (Process) to open the Process Sample page.
2.
Use the Data Dial or the -/+ buttons to select the desired editing option (described below) in the
Function field. Some options have some additional parameters—use the Cursor Buttons to select
them and the Data Dial or -/+ buttons to adjust them.
3.
To execute a selected option, press F5 (Do It), or cancel your changes by pressing F4 (Cancel).
Project Information
This is identical to the Project Information in Main Mode. For more information, please see
Project
Information.
Important: Newly recorded samples will be shown in the Sample area of the Project Information. To
use them in your Project, load them into Programs first.
The Process Sample display for Pitch Shift of the MPC hardware.
203
Main Mode >