Akai MPC User Manual page 142

• V>Atk (Velocity  Attack) sets how much velocity is needed (for a triggered pad or key) to
modulate the Attack phase for the Amp envelope.
•
V>Env (Velocity  Envelope) enables velocity information to control the amount of the filter
envelope's effect on the cutoff frequency.
•
V>Flt (Velocity  Filter) uses the velocity of a pad or key to modulate the cutoff frequency directly.
The Filter Envelope controls affect the filter frequency. The knobs control the envelope shape or time-
variant modulation output. Adjust envelope's influence on the filter frequency with the Env knob. See the
following Anatomy of an Envelope
The Amp Envelope controls affect level changes over time. The knobs control the envelope shape or
time-variant modulation of a sound's level. See the following
about the envelope parameters.
Hardware:
To edit the Filter, Filter Envelope, and Amp Envelope parameters, press the F4 button (Flt Env). Use
the Q-Link Knobs for direct access of all 16 parameters.
To set the Filter Envelope type or Amp Envelope type, press the Window button while on the Flt Env
tab. Use the Cursor Buttons to select the Filter Envelope or Amp Envelope, and use the Data Dial or -
/+ buttons to select AD or AHDS. See the following
the envelope parameters.
below to learn about the envelope parameters.
Anatomy of an Envelope
142
Anatomy of an Envelope
below to learn more about
below to learn