Akai MPC User Manual page 301

Copy Track: This lets you copy the contents of one Track to
another, which you can set in the Copy Track window that
appears.
Click the Copy Contents of Track drop-down menu to select
the "source" Track, and click the Over Contents of Track
drop-down menu to select the "destination" Track.
Click Do It to confirm your choice or Cancel to cancel the operation.
Hardware: To copy the contents of one Track to another:
1. Press Seq Edit to open the Edit Sequence window.
2. Press Pad 08 (Copy Track) to open the Copy Track window.
3. Use the Cursor Buttons to select the desired field and use the Data Dial or –/+ buttons to adjust
them.
•
Copy Contents of Track: Use this field to select the "source" Track.
•
Over Contents of Track: Use this field to select the "destination" Track.
4. Press F5 (Do It) to confirm your choice or F4 (Back) to cancel the operation.
(This function on your MPC hardware has existed in earlier releases but was not described in the earlier
User Guide.)
The Copy Track window in the MPC hardware display.
301