Akai MPC User Manual page 296

•
Copy Bars From: Sequence: Use this field to select the "source" Sequence.
•
First Bar / Last Bar: Use these fields to set the range of bars you want to delete.
•
Copy Bars To: Sequence: Use this field to select the "destination" Sequence.
•
After Bar: Use this field to set the bar of the Sequence after which you want to add the copied
bars.
•
Copies: Use this field to set how many instances of the copied bars you want to add
4. Press: F4 (Replace) to overwrite the designated bars of the destination Sequence; F5 (Merge) to
add the copied events to the designated bars of the destination Sequence without erasing anything;
or F3 (Back) to cancel the operation.
(This function on your MPC hardware has existed in earlier releases but was not described in the earlier
User Guide.)
296